Cleaning and Maintenance
CAUTION:
maintenance procedures.
Keep the following in mind during regular service and inspection:
All screws for installing the fixture or parts of the fixture must be tightly connected and
•
must not be corroded.
There must not be any deformations to the housing, lenses, rigging, and installation points
•
(ceiling, suspension, trussing).
Moving parts must not show any signs of wear and must move smoothly without issue.
•
The power supply cables must not show any damage, material fatigue, or sediment.
•
If spare parts are required, order only genuine parts from your local authorized dealer.
•
To ensure that the fixture remains in good working condition and does not fail prematurely,
regular maintenance is recommended.
1.
Clean the inside and outside lens regularly using a damp, lint-free cloth to avoid loss of
output due to accumulation of dust/dirt on the lens. Never use alcohol or solvents.
2.
Clean the fans regularly to ensure maximum airflow and efficient cooling. This will ensure
that the light source operates in the best possible condition.
26
Disconnect the fixture from mains power before starting any
SolaFrame Theatre User Manual