System Sensors And Adjustments - Directed Electronics Concept 650 Owner's Manual

Dei clifford concept 650 car alarms: owners guide

Hide thumbs Also See for Concept 650:

Table of Contents

system sensors and adjustments

Your system was installed with one of 3 different sensor configuration

options. Either, Digital Dual Zone proximity sensor, Ultrasonic sensor, or

Tilt/Motion & Glass Tamper sensor.

Proximity Sensor : The digital dual-zone proximity sensor uses dig-

ital signal processing to detect mass movement inside the pas-

senger compartment and very near the vehicle. The sensor is

impervious to air movement so it is ideal for use on convertible

vehicles.

Glass Tamper Sensor: Metal on glass, glass cracking, and breaking

glass each produce distinctive acoustic signatures. The 506T glass

tamper sensor uses a microphone to pick up sounds, and then ana-

lyzes them with proprietary acoustic software to determine if the

glass has been struck.

Tilt/Motion Sensor:

being raised in an attempt to either remove the wheels/tires or

tow the vehicle. This sensor is capable of learning the vehicle's ini-

tial angles of vertical and horizontal inclination each time the

vehicle is parked.

Ultrasonic Sensor:

of a vehicle's interior cabin area. The sensor detects movement

inside the vehicle by sensing air disturbance.

For sensitivity adjustments for all sensors, please return to your

installing Clifford dealer.

The 507T sensor detects when the vehicle is

The 509U sensor is used to provide coverage

Table of Contents