Table of Contents
Advertisement
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
Reset the system to all factory defaults
Entry delay feature on/off
Add or remove remote controls.
BlackJax* feature on or off.
Change PIN code.
Custom configure the remote control.
Remote valet on or off.
Autostart** with low battery voltage or cold temperature.
cliffnet wizard installation software programming
Cliffnet Wizard provides access to all available system features and
some that are not available when manually programming with the
Valet switch. Cliffnet Wizard is compatible with Microsoft Windows
95/98/2000/ME/XP/NT so most programming operations can be
accomplished by pointing and clicking with a mouse. This eliminates
the need for programming grids and lengthy programming sequences.
For a complete guide to system programming using the Cliffnet Wizard
refer to the Cliffnet Wizard help menu.
* This feature is not evaluated by Thatcham
** Requires optional Intellistart (not evaluated by Thatcham).
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
21
Advertisement
Table of Contents
