One-Time Valet Feature; Blackjax* Feature - Directed Electronics Concept 650 Owner's Manual

Dei clifford concept 650 car alarms: owners guide

Hide thumbs Also See for Concept 650:

Table of Contents

Disarming auto-immobilisation

To disarm auto-immobilisation when active, follow any of the

sequences listed below.

Turn ignition on and press the arm/disarm button.

Arm the alarm and then disarm the alarm.

Turn the ignition on and enter the system valet/PIN code.

one-time valet feature

This feature allows the system to be put in valet mode only until the

next time the ignition is turned on. (This feature is a Thatcham and EC

requirement and, therefore is not programmable.)

Clifford's exclusive BlackJax feature provides a safe and effective means

of recovering your vehicle after a carjacking by monitoring the door

input, brakes, and engine speed. Simply get out of the vehicle and let

the thief drive away.

After the vehicle is at a safe distance BlackJax will activate the siren and

brake lights to draw attention to the vehicle. When BlackJax sees the

vehicle slow down or stop, the UltraSecure Immobiliser circuit shuts off

the engine, stranding the thief and vehicle. At this time your transmit-

ter will not operate the system, only you can turn off the BlackJax by

entering your secret PIN through the PlainView 2 valet switch.

* This feature is not evaluated by Thatcham

Table of Contents