Auxiliary Channel Bypass; Panic Mode With Smart Door Locking; Valet Mode - Directed Electronics Arrow 5 Owner's Manual

auxiliary channel bypass

Alarm sensor input zones three and eight will be bypassed while a
pulsed or timed auxiliary Output is active.

panic mode with smart door locking

If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your transmitter! Just press
two seconds to enter Panic Mode. The siren will sound and the park-
ing lights will flash for the programmed duration. If the ignition is on,
the doors will lock; if the ignition is off, the doors will unlock. To stop
Panic Mode at any time press
n n o o t t e e : : If the ignition is on, the doors will lock; if off, the doors will
unlock.

valet mode

You can prevent your security system from automatically arming by
using Valet Mode. This is very useful when washing the vehicle or hav-
ing it serviced. In Valet Mode, the security system will not arm, even
with the transmitter, but all convenience functions (door locks, trunk
release, etc.) will continue to work normally.
To enter Valet Mode:
1. Turn the ignition on.
2. Enter PIN code (factory setting is 2).
© 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c .
on the transmitter again.
for