Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pentair AURORA 1070 Series
Summary of Contents for Pentair AURORA 1070 Series
- Page 1 INSTRUCTION, INSTALLATION, MAINTENANCE AND REPAIR MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part # A-03-334 | © 2015 Pentair Ltd. | 07/06/15...
- Page 2 1070 SERIES STARTING UP: CAUTION The pump must be fully primed on start-up. Fill system piping Always disconnect power supply from motor before and pump body with liquid and vent complete system, turning servicing. pump by hand to dislodge air from body. Make sure fittings and drain valves are airtight, then add any additional fill required.
- Page 3 1070 SERIES SEAL REPLACEMENT: Continue pressing against coupler end of shaft, remount impeller and reassemble the seal bearing assembly into body. If Remove pump bracket from body. Remove the impeller, necessary, install a new body gasket and clean gasket surface of damaged seal assembly, ceramic insert and rubber cup.
- Page 4 WARRANTY Seller warrants equipment (and its component parts) of its own manufacture against defects in materials and workmanship under normal use and service for one (1) year from the date of installation or start-up, or for eighteen (18) months after the date of shipment, whichever occurs first.
Need help?
Do you have a question about the AURORA 1070 Series and is the answer not in the manual?
Questions and answers