Music Player Mode (Upnp, Usb) - Hama IR360MBT Operating Instructions Manual

Use:
• In the Spotify app, start playback of a playlist or title as
usual.
• The usual playback information is displayed, such as the
album cover, title, etc.
• At the bottom edge of the screen, the Spotify Connect
logo is shown next to Available devices.
Playback screen
• Choose Available devices to access an overview of
all devices available on the network.
• Select the radio. The audio is now played back on the
radio.
Once the connection has been established, the Spotify
Connect logo and the device designation are displayed
in green.
After successful initial connection:
Press [M] on the device or [MODE] on the remote control
repeatedly to activate Spotify mode (Spotify Connect) on
the radio.
Alternatively, you may do this using the UNDOK app:
• Press (or [►II /
playback.
• Alternatively, you can control the radio (skip to a different
title, adjust the volume, etc.) using the remote control or
the Spotify app.

11. Music player mode (UPNP, USB)

This operating mode enables the playback of MP3,
WMA or FLAC files stored on a PC, data medium or local
network.
Press [M] on the device or [MODE] on the remote control
repeatedly to activate Music player mode on the radio.
Alternatively, you may do this using the UNDOK app:
Alternatively, press [MEDIA] on the remote control to
switch directly to this operating mode.
15
UNDOK App
source

spotify
] on the remote control) to begin
UNDOK App
source

music player