Music Player Mode (Upnp, Usb); Playback From A Computer (Streaming) - Hama IR80MBT Operating Instructions Manual

Use:
• In the Spotify app, start playback of a playlist or title as
usual.
• The usual playback information is displayed, such as the
album cover, title, etc.
• At the bottom edge of the screen, the Spotify Connect
is shown next to Available devices.
logo
• Choose Available devices to access an overview of
all devices available on the network.
• Select the radio. The audio is now played back on the
radio.
Once the connection has been established, the Spotify
Connect logo and the device designation are displayed
in green.
After successful initial connection:
Press [M] on the device or [MODE] on the remote control
repeatedly to activate Spotify mode (Spotify Connect) on
the radio.
Alternatively, you may do this using the UNDOK app:
• Press
(or [►II / ] on the remote control) to begin
playback.
• Alternatively, you can control the radio (skip to a different
title, adjust the volume, etc.) using the remote control or
the Spotify app.

11. Music player mode (UPNP, USB)

This operating mode enables the playback of MP3, WMA or
FLAC files stored on a PC, data medium or local network.
Press [M] on the device or [MODE] on the remote control
repeatedly to activate Music player mode on the radio.
Alternatively, you may do this using the UNDOK app:
Alternatively, press [MEDIA] on the remote control to
switch directly to this operating mode.
UNDOK App
source

spotify
UNDOK App
source

music player
14

11.1 Playback from a computer (streaming)

You can manage the radio and stream music to it from your
computer.
The following explanation assumes your computer's
operating system is Windows 8. If you use a different
operating system and require assistance, or if you have
any other questions, please contact our customer
team.
Requirements:
• The radio and the computer must be on the same
network.
• The radio must be authorised as a playback device on the
computer.
Proceed as follows:
à Control Panel à Network and Internet à View
network computers and devices
The radio should be shown here.
• Right-click on the icon or designation of the radio and
choose Allow streaming to this device.
• Right-click again on the icon or designation of the radio
and choose Show device website to change the
designation (friendly name) of the device.
• A new browser window opens. You can make the desired
changes here.
Use:
• The radio can now access shared directories on the
computer, and you can stream audio files to the device
for playback.
• The music directory of your music library is enabled as
standard.
• Create and manage shared folders using Explorer or
Windows Media Player.
• Right-click on the desired music file, choose Play To,
and then select the designation of the radio.
• The radio begins playback of the music file.
support