Smartgrid; Remote Control - Miele WWV 980 WPS Passion Operating Instructions Manual

Settings

SmartGrid

The setting is only visible if
SmartGrid
the
Miele@home
activated.
You can set your washing machine to
start automatically based on an ex-
ternal signal within a certain time
period.
Activating
SmartGrid
sensor a new function. Use the "Timer"
sensor to set SmartStart. The washing
machine will then start within the time
period specified by you when it receives
an external signal. If an external signal
has not been received by the latest start
time set, the washing machine will start
automatically (see the "Delay start"
chapter).
SmartGrid is deactivated as standard.
114
setting is set up and
gives the Timer

Remote control

The
Remote control
ible if the
Miele@home
and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileControl programme.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If
Remote control
app can cause the programme to be
cancelled.
Use the "Timer֨" sensor control to set a
timeframe within which you want to
start the washing machine and the
timer (see "Timer").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by the
latest start time set, the washing ma-
chine will start automatically.
Remote control is activated by default.
setting is only vis-
setting is set up
Remote control
is not switched on, the