Garmin EDGE 520 PLUS Owner's Manual page 38

3
Rotate the wheel to check for
clearance.
The sensor should not contact other
parts of your bike.
NOTE: The LED flashes green for five
seconds to indicate activity after two
revolutions.
Device Information
Charging the Device
, NOTICE
To prevent corrosion, thoroughly dry the
USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
The device is powered by a built-in lithium-
ion battery that you can charge using a
standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when
outside the approved temperature range
(page 8).
1
Pull up the weather cap
CD
from the
USB
port ~ -
8
2
Plug the small end of the USB cable
into the USB port on the device.
3
Plug the large end of the USB cable
into an AC adapter or a computer USB
port.
4
Plug the AC adapter into a standard
wall outlet.
When you connect the device to a
power source, the device turns on.
5
Charge the device completely.
Specifications
Edge operating temperature range:
From -20° to 60°C (from -4° to 140°F)
Edge charging temperature range: From
oo
to 45°C (from 32° to 113°F)
Speed sensor and cadence sensor
operating temperature range: From
-20° to 60°C (from -4° to 140°F)
Quick Start Manual