Bristan Bliss series Installation Instructions And User Manual page 15

Electrical Connections
Electrical Connection Entry Point
Options - continued
Alternatively, if preferred, it is possible to route the cable
from the rear bottom right or bottom right positions as
shown below by stripping the sheath back further.
Select the cable inlet option most suited to your situation.
N L
Rear bottom

right cable entry
Note: Depending on cable size and entry point used it may
be necessary to strip back outer cable sheath sufficiently
to allow cables to be directed to the terminal connection
block within the unit.
*
Pipe Note: When feeding cable through bottom
cover
entry points remove highlighted grey tab
on pipe/blanking cover if using 6mm cable.
Blanking
For 10mm cable remove the pipe/blanking
cover
cover entirely.

Note: We
recommend
that the blue
(neutral) and
brown (live)
cables are
fed under the
filter housing.
Position the
earth cable
under the
outlet on top
of the filter
housing.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
N L
Bottom right
cable entry

Outlet
Filter housing
*

15