Operating The Shower - Bristan Bliss series Installation Instructions And User Manual

Electric shower
Table of Contents

Advertisement

Operating the Shower

Please ensure the commissioning procedure has been
carried out.
If you did not fit this shower yourself and you are about to
use it for the first time, check with the installer to ensure he
or she has run the commissioning procedure as described on
page 18.
To Start the Shower
Press the STOP/START touch button (3).
Note: The display will only light up once the STOP/START
touch button is pressed, then the temperature indicator display
will start to count up.
During periods of high ambient temperatures (e.g. hot
summer days), it may be necessary to select a lower power
setting in order to achieve your ideal shower temperature.
When adjusting the temperature, including during first start
up, do not rapidly turn the dial to Max Temp to increase the
temperature. Instead, use small changes and wait for the
new temperature to settle before changing again.
To Stop the Shower
Press the STOP/START touch button (3).
Phased Shut Down: When the shower is turned off, water
will continue to flow for a short period of time while the
heater cools down. This ensures that the shower is ready for
the next user. Do not use the isolation switch (pull cord) to
stop the shower, use the STOP/START touch button (3).
It is always advisable to test the water temperature with
your hand before stepping under the shower. Please note
that there is always a delay of a few seconds between you
selecting a temperature setting and the selected water
temperature starting to flow.
Operating the Controls
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Power Control
Temperature Control
Power Control
Temperature Control
NO Heater
OFF
3
Elements ON
NO Heater
COLD Water
Elements ON
1 Heater
Medium
Temperature Water
Element ON
2 Heater
HOT Water
Elements ON
HOT
COLD
NO Heater
OFF
Elements ON
NO Heater
COLD Water
Elements ON
1 Heater
Medium
Element ON
Temperature Water
2 Heater
HOT Water
Elements ON
HOT
COLD
(reduced flow)
(increased flow)
(reduced flow)
(increased flow)
19

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bliss series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Bliss bl385 wBliss bl385 bBliss bl395 wBliss bl395 bBliss bl3105 wBliss bl3105 b ... Show all

Table of Contents

Save PDF