Getting Started - D-Link DWL-8220AP Manual

Wireless switch access point
Hide thumbs Also See for DWL-8220AP:
Table of Contents

Advertisement

DWL-8220AP User's Manual
Please read the following before you begin:
1. Do not operate the DWL-8220AP access point near unshielded blasting caps or in an
otherwise explosive environment unless the device has been modified for such use by
qualified personnel.
2. Do not touch or move the DWL-8220AP access point when the antennas are transmitting
or receiving.
3. Do not hold any radio device so that the antenna is very close to or touching the face,
eyes, or other exposed body part while the device's radio antenna is transmitting.
4. Before using a wireless device in a hazardous location, consult the local codes, national
codes, and safety directors of the location for usage constraints.
5. Do not connect or disconnect cables or otherwise work with the DWL-8220AP access
point hardware during periods of lightning activity.
6. The DWL-8220AP access point is intended for indoor use only. Do not install the device
outdoors.
7. To reduce the possibility of connection interference caused by dust, clean the CAT5
connector pins before inserting a cable into an DWL-8220AP access point.
D-Link Systems, Inc.

Getting Started

Getting Started
9

Advertisement

Table of Contents
loading

Table of Contents