Advertisement
www.collegehillshonda.com
9.
While wearing eye protection, use an air saw to cut
the roof molding at the measurements shown.
FRONT
130 mm
(5.1 in.)
893 mm
(35.2 in.)
Cut off.
AIR SAW
10. Install one new roof molding clip to each roof
molding.
ROOF MOLDING CLIP
ROOF
MOLDING
ROOF MOLDING
CLIP
4 of 5
85 mm
(3.3 in.)
1,110 mm
(43.7 in.)
Cut off.
700205CX
ROOF
MOLDING
ROOF MOLDING
CLIP
FRONT
700206AX
11. Reinstall the roof molding left cover.
ROOF MOLDING
LEFT COVER
FRONT
12. Reinstall the roof moldings back into the left roof
channel using the two new roof molding clips
installed in step 10.
ROOF
MOLDING
CLIP
130 mm
(5.1 in.)
AII 46396 (1108)
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
TAILGATE
830701BD
ROOF MOLDING
CLIP
LEFT ROOF
CHANNEL
ROOF MOLDING
700207AX
Advertisement
