Block/ Wiring Diagram; Default Settings - ICP DAS USA I-7083 Quick Start Manual

3. Block/ Wiring Diagram

4. Default Settings

Default settings for the I-7083 module is as follows:
- address=01
- baud rate=9600
- checksum disable
- data=1 start+8 data+1 stop(no parity)
- type=53
- Mode= 5 for 7083, L=0, XOR=1, CwCcw mode
D for 7083B, L=1, XOR=1, CwCcw mode
I-7083 3-axis, 32-bit Encoder Counter DAQ Module - QuickStart (Oct/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2