Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDF26020XA
Summary of Contents for Zanussi ZDF26020XA
- Page 1 User Manual GETTING STARTED? EASY. ZDF26020XA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
Put the cutlery in the cutlery basket with the sharp ends • pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door unattended to •... - Page 4 • Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes. • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
-
Page 5: Control Panel
CONTROL PANEL On/off button Delay button Display Programme buttons Indicators INDICATORS Indicator Description XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. -
Page 6: Programme Selection Mode
PROGRAMMES Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil • Pre-wash 0.920 Crockery and • Wash 50 °C cutlery • Rinses • • Pre-wash 45 - 160 0.7 - 1.5 7 - 12 Crockery, cut- •... - Page 7 RESET FUNCTION ADJUSTING THE WATER SOFTENER Use Reset to: Make sure that the appliance is in user mode: • Reset the currently running programme. 1. Press • Stop the countdown of the Delay option. • The indicators are off. • Bring the appliance back to the programme selection mode.
-
Page 8: How To Deactivate Airdry
• The indicator flashes. While the drying phase operates, the • The display shows the current setting: device opens the appliance door. The door is then kept ajar. – = rinse aid empty notification activated. By default, AirDry is activated with all programmes –... -
Page 9: Daily Use
ADDING SALT Before the first use, put one litre of water in the salt container. CAUTION! Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme immediately after filling the salt container. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. -
Page 10: Adding Multi-Tablets
ADDING MULTI-TABLETS • Adjust the water softener to the lowest level. THE AUTO OFF FUNCTION 4. Close the appliance door to start the programme. This function decreases energy consumption by deactivating automatically the appliance when it is Once the programme starts running, not operating. -
Page 11: Hints And Tips
END OF THE PROGRAMME • Close the water tap. When the programme is complete, the display If you open the door before the shows: 0:00. activation of Auto OFF, the appliance • Press on/off or wait 5 minutes for the Auto OFF is automatically deactivated. -
Page 12: Care And Cleaning
• The programme is applicable for the type of load • Put light items in the upper basket. Make sure and for the degree of soil. that the items do not move. • The correct quantity of detergent is used. •... -
Page 13: Internal Cleaning
• Do not use abrasive products, abrasive cleaning limescale inside the appliance. To prevent this, pads or solvents. we recommend to run long duration programmes at least 2 times per month. INTERNAL CLEANING • To maintain the performance of your appliance at its best, we recommend to use monthly a •... -
Page 14: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in the dis- • This is not a defect. - Page 15 Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appli- ance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. •...
-
Page 16: Technical Information
Problem Possible cause and solution Limescale deposits on the table- • The level of salt is low, check the refill indicator. ware, on the tub and on the in- • The cap of the salt container is loose. side of the door. •... -
Page 17: Environmental Concerns
ENVIRONMENTAL CONCERNS the symbol with the household waste. Return the Recycle the materials with the symbol . Put the product to your local recycling facility or contact packaging in applicable containers to recycle it. your municipal office. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. - Page 20 WWW.ZANUSSI.COM/SHOP...