System; Interfaces; Change Ip Of The Lan Or Dmz Interface - D-Link DFL-700 Manual

System

Interfaces

Click on System in the menu bar, and then click interfaces below it.

Change IP of the LAN or DMZ interface

Follow these steps to change the IP of the LAN or DMZ interface.
Step 1. Choose which interface to view or change under the Available interfaces list.
Step 2. Fill in the IP address of the LAN or DMZ interface. These are the addresses that
will be used to ping the firewall, remotely control it, and used as the gateway for the
internal hosts or DMZ hosts.
Step 3. Choose the correct Subnet mask of this interface from the drop down menu.
Click the Apply button below to apply the settings or click Cancel to discard changes.
15