Administrative Users; Add Administrative User - D-Link DFL-700 Manual

Administrative users

Click on Firewall in the menu bar, and then click Users below it. This will display all the
users. The first section lists the administrative users.
The first column show the access levels, Administrator and Read-only. An Administrator
user can add, edit and remove rules, change settings of the DFL-700, and so on. The Read-
only user can only look at the configuration. The second column displays the users in each
access level.

Add Administrative User

Follow these steps to add a new
administrative user.
Step 1. Click
corresponding to the type of user
you would like to add, Admin or
Read-only.
Step 2. Fill in the User name;
make sure you are not trying to
add one that already exists.
Step 3. Specify the password for the new user.
Click the Apply button below to apply the settings or click Cancel to discard changes.
Note: The user name and password should be at least six characters long. The user
name and password can contain numbers (0-9) and upper and lower case letters (A-Z, a-
z). Special characters and spaces are not allowed.
on add
35