Add User; Change User Password - D-Link DFL-1100 User Manual

Add User

Follow these steps to add a new user.
Step 1. Click on add corresponding to
the type of user you would like to add,
Admin or Read-only.
Step 2. Fill in User name; make sure
you are not trying to add one that
already exists.
Step 3. Specify which groups the user
should be a member of.
Step 3. Specify the password for the
new user.
Click the Apply button below to apply
the settings or click Cancel to discard
changes.
Note: The user name and password should be at least six characters long. The user
name and password can contain numbers (0-9) and upper and lower case letters (A-Z, a-
z). Special characters and spaces are not allowed.

Change User Password

To change the password of a user click on the user name and you will see the following
screen.
Follow these steps to change a user
password.
Step 1. Click on the user for which you
would like to change the password.
Step 2. Enable the Change password
checkbox.
Step 3. Enter the new password twice.
Click the Apply button below to apply
the settings or click Cancel to discard
changes.
Note: The password should be at least six characters long. The password can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z). Special characters and spaces
are not allowed.