Wan Interface Settings - Using Pptp - D-Link DFL-1100 User Manual

WAN Interface Settings – Using PPTP
PPTP over Ethernet connections
are used in some DSL and cable
modem networks.
You need to enter your account
details, and possibly
configuration parameters
actual physical interface that the
PPTP tunnel runs over. Your ISP
should supply this information.
•
Username – The login
or username supplied
to you by your ISP.
•
Password
password supplied to
you by your ISP.
•
PPTP Server IP – The
IP of the PPTP server
that the DFL-1100 will
connect to.
Before PPTP can be used to connect to your ISP, the physical (WAN) interface
parameters must be input. You can use either DHCP or Static IP, depending on the type of
ISP used. Your ISP should supply this information.
If using static IP, this information needs to be filled in.
•
IP Address – The IP address of the WAN interface. This IP is used to connect to
the PPTP server.
•
Subnet Mask – Size of the external network.
•
Gateway IP – Specifies the IP address of the default gateway used to access the
Internet.
also IP
of the
– The
18