Dhcp Server; Users - D-Link DFL-1100 User Manual

DHCP Server

Click on Status in the menu bar, and then click DHCP Server below it. A window will
appear providing information about the configured DHCP Servers. By default, information
about the LAN interface
will be displayed. To see
another one, click on
that interface.
Interface – Name of
the interface the DHCP
Server is running on.
IP Span – Displays
the configured range of
IP addresses that are
given out as
leases.
Usage – Displays
how much of the IP
range is give out to
DHCP clients.
Active leases are
the current computers
using this DHCP server.
It is also possible to end
a computers lease on
this screen by clicking
on End lease corresponding to that IP.
Inactive leases are leases that are not currently in use but have been used by a computer
before. That computer will get the lease the next time it is on the network. If there is no free IP
in the pool these IP's will be used for new computers.

Users

Click on Status in the menu bar, and then click Users below it. A window will appear
providing user information.
Currently authenticated users – users logged in using HTTP/HTTPS authentication,
users logged in on PPTP and L2TP servers will be listed here. Users can be forced to log out
by clicking logout.
Currently recognized privileges – all users and groups that are used in policies are
listed here. These users and groups will be able to use HTTP and HTTPS authentication.
Interfaces where authentication are available – here all interfaces where HTTP and
HTTPS authentication is possible is listed.
DHCP