Bunn ITCB DV Installation & Operating Manual page 18

PROGRAMMING (cont.)
BREWER SETTINGS - Machine settings lets the operator make changes to the energy saver,
funnel detect, and screen saver. The green check mark means the feature is enabled. Pressing
the button again will disable that feature and the check mark will go away to leave just an empty
white box. Once enabled if the feature has settings that must be set, the user will be taken directly
to the set up screens.
BREW SETTINGS - Users can press the temp set temperature number to go to a keypad entry
screen to change the value. The ready temperature will work similarly, but can only be accessed
if brew lockout is enabled. If brew lockout is disabled, then the ready temperature is greyed out
and the button will become inactive. Selecting the brew lockout checkbox will alternate states
between enabled and disabled. If the ready temperature is active, it allows a value to be entered
in a range of 2 to 20 degrees below the tank set temperature.
Page 18
55502 000000