Advertisement
To call a handset:
When you have switched walk
and talk mode on for at least
two handsets as shown on
page 48:
Press the
button.
Display will show
All handsets that are in walk
and talk mode will be called.
The connection will be made
with the first handset to
answer the walk and talk call.
To answer a call:
Press the
button to take the call.
To end a call:
Press the
You can use a handset as a room monitor.
If a certain noise level is reached, for
example a baby crying, the handset will
automatically dial an internal or external
number which you have set.
The following points should be considered
when using the room monitor:
• If you store an external number that
has an answering machine connected,
it should be switched off.
• Make sure Call barring is not set.
• Any incoming calls on the handset
being used as the room monitor will
not ring at the handset, however,
the display will show when you have
a call.
• The battery power is used up more
quickly. If using for long periods of
time it may be advisable to place the
handset in the base to ensure that the
battery does not run out.
button.
• When an external number is called it
will ring for approximately 90 seconds
but room monitor calls to an internal
number are unlimited.
49
Advertisement
