Advertisement
During a call you can switch to
handsfree mode:
Press the
The call is transferred to the
loudspeaker.
Press the
button to switch back to using
the handset.
If you need to replace the handset in
the base station during a call, for
example, because the battery is flat,
hold down the
There are three directory options
available. Up to 100 name and number
directory, an extra directory where an
additional 10 names and numbers can
be stored and a voice activated
directory. Instructions for the standard
directory are described here, but
please see page 72 for instructions on
using the extra directory and voice
activated directory.
You can store up to 100 names and
numbers in the standard telephone
directory. You can enter up to 32 digits
and up to 16 characters.
button.
button.
Press the
Press the
options button.
Display shows
Press the
options button.
Enter the telephone number.
Press the
options button to
enter the name.
Enter the name.
Entering names:
Enter the name using the letters
on the keypad. For example, to
enter the name
Press the
button,
on the display.
Press the
button three times
until the display shows .
Then press the
button to
display .
For the full character map,
see page 18.
Press the
options
button. Display shows
.
Press the
options button
to confirm.
Press the
until you reach the idle display.
button.
.
:
appears
button
17
Advertisement
