Table of Contents
Advertisement
GB
over heating
If the Auto+ 80X is used continuously for over 10 minutes the shredder may overheat and the cool
down indicator will flash red (
). Please allow the shredder to cool down. When the shredder is
ready to be used the thermometer symbol will no longer illuminate. If the shredder needs to cool
down while shredding, no action is needed. The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use. All you need to do is ensure paper is
loaded into the chamber and the bin is empty when the machine is cooling down.
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop
and the Bin Full indicator will illuminate (
).
rare occasions of jamming
In the unlikely event of the shredder jamming, the Auto+ 80X will stop shredding. Check that the bin
is not full then try clearing the jam using the reverse (
) and continuous jam boost (
) switch
then return to Auto mode (
). If this is unsuccessful follow the reverse function instructions.
4. bin full
The shredder will not function when the bin is full and the bin full symbol (
) is illuminated.
You should empty the bin.
• Pull open the bin slowly to empty.
• Push the empty bin back into place and the machine will resume shredding.
lubrication of the shredder
Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands accepts no liability for
product performance or safety when other types or brands of lubricants are used on any part(s) of
this machine. Rexel recommend using an oil sheet after the bin has been emptied three times (and
for ongoing three bin cycle thereafter). Insert the oil sheet into the manual feed slot and NOT in the
auto-feed chamber. Using an oil sheet in the auto-feed chamber will contaminate the feed rollers
preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers
become contaminated.
5. maintenance
The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a dry
cloth to maintain maximum product performance.
service
We recommend these machines are serviced every 6 to 12 months by a Rexel service engineer –
see back of this booklet for the contact details of your local service centre and for enquiries about
maintenance contracts.
10
register this product online at www.accobrands.com
Hide quick links:
Advertisement
Table of Contents
