Onkyo TX-NR585 Instruction Manual page 86

„ 5. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item Default Value
BD/DVD AUDIO 1
CBL/SAT AUDIO 2
GAME AUDIO 3
STRM BOX AUDIO 4
PC ---
CD AUDIO 5
TV AUDIO 6
PHONO PHONO
Setting Details
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the BD/DVD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CBL/SAT button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the GAME button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the STRM BOX button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the PC button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the TV button.
The setting cannot be changed.
Contents Connections
≫
2. Speaker
„ 1. Configuration
Change the settings of connection environment of the speakers.
Setting Item Default Value
Speaker 7.1 ch
Channels
Subwoofer Yes
Height Speaker Top Middle
Zone Speaker No
86
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1
ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch" or
"5.1.2 ch" to suit the number of speaker channels
connected.
Set whether a subwoofer is connected or not.
"Yes": When a subwoofer is connected
"No": When a subwoofer is not connected
Set the speaker type if height speakers are
connected to the SURROUND BACK or HEIGHT
terminals.
Select "Front High", "Top Front", "Top Middle", "Top
Rear", "Rear High", "Dolby Speaker (Front)" or
"Dolby Speaker (Surr)" according to the type and
layout of the connected speakers.
• If the item cannot be selected even though
connection is correct, check if the setting in
"Speaker Channels" matches the number of
connected channels.
Set whether speakers are connected to Zone 2
speaker terminals.
"Zone 2": When speakers are connected to Zone 2
speaker terminals
"No": When speakers are not connected to Zone 2
speaker terminals
≫