Onkyo TX-NR585 Instruction Manual page 127

Component input
480i/576i
Composite input
480i/576i
• Signals are output from the HDMI OUT jack of this unit to the TV with the
same resolution as the input resolution.
„ Audio Inputs
Digital
OPTICAL 1 (CD), 2 (TV)
COAXIAL (BD/DVD)
Analog
BD/DVD, CBL/SAT, GAME, STRM BOX, CD, TV, PHONO, AUX (front)
„ Audio Outputs
Analog
ZONE2 LINE OUT
2 SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R or
HEIGHT L/R, ZONE 2 L/R (Banana plug ready)
Phones
PHONES (Front, ø 6.3 mm, 1/4")
„ Others
Setup Mic: 1 (Front)
USB: 1 (Ver. 2.0, 5 V/1 A)
Ethernet: 1
„ Power consumption in standby mode
• In the following cases, the power consumption in standby mode may reach up
to a maximum of 12 W:
– When "Network Standby" is set to "On"
– When "HDMI CEC" is set to "On"
– When "HDMI Standby Through" is set to other than "Off"
– When "Bluetooth Wakeup" is set to "On"
Contents Connections
≫
– When "USB Power Out at Standby" is set to "On"
Specifications and features are subject to change without notice.
License and Trademark
❏
127
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫