Onkyo TX-NR585 Instruction Manual page 60

Table of Contents

Advertisement

When FM broadcasts reception is poor:
Manually" (
p60). Note that if you tune manually, the reception for FM
broadcasts will be monaural rather than stereo, irrespective of the sensitivity of
the reception.
Tuning Manually
Note that if you tune manually, the reception for FM broadcasts will be monaural
rather than stereo, irrespective of the sensitivity of the reception.
1. Press TUNER repeatedly to select either "AM" or "FM".
2. Press MODE to display "TunMode: Manual" on the display.
3. While pressing the cursors
/ , select the desired radio station.
• Each time you press the cursors
If the button is held down, the frequency changes continuously, and if the
button is released, the frequency stops changing.
Frequency step setting
Press
, and using the cursors and ENTER, select "7. Miscellaneous" - "Tuner"
- "AM/FM Frequency Step", and then select the frequency step for your area.
Please change it to "9 kHz / 0.05 MHz". Note that when this setting is changed,
all radio presets are deleted.
Contents
Perform the procedure for "Tuning
/ , the frequency changes by 1 step.
Connections
❏ Presetting a Radio Station (
60
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
p61)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents