Ip Interface Commands - D-Link DGS-3224TGR Command Line Interface Reference Manual

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User's Guide
The IP interface commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config ipif System vlan <vlan_name>
ipaddress <network_address>
state [enable|disable]
bootp
dhcp
show ipif <ipif_name>
Each command is listed, in detail, in the following sections.
config ipif System
Purpose Used to configure the System IP interface.
17
IP I
NTERFACE
C
OMMANDS
149