D-Link DGS-3224TGR Command Line Interface Reference Manual page 190

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User's Guide
config radius
Description The config radius command is used to
configure the switch's RADIUS settings.
<server_index 1-3> − Assigns a number to
Parameters
the current set of RADIUS server settings.
Up to three groups of RADIUS server
settings can be entered on the switch.
<server_ip> − The IP address of the RADIUS
server.
key − Specifies that a password and
encryption key will be used between the
switch and the RADIUS server.
<passwd 32> − The shared-secret key
used by the RADIUS server and the
switch. Up to 32 characters can be used.
default − Returns all of the ports in the
range to their default RADIUS settings.
auth_port <udp_port_number 1-65535> −
The UDP port number for authentication
requests. The default is 1812.
acct_port <udp_port_number 1-65535> −
The UDP port number for accounting
requests. The default is 1813.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure RADIUS settings:
config radius add 1 10.48.74.121 key dlink default
DGS-3224TGR:4#
Command: config radius add 1 10.48.74.121 key dlink default
Success.
186