D-Link DGS-3224TGR Command Line Interface Reference Manual page 165

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User's Guide
DGS-3224TGR:4#config router_ports default add1-10
Command: config router_ports default add 1-10
Success.
DGS-3224TGR:4#
enable igmp_snooping
Purpose Used to enable IGMP snooping on the
switch.
Syntax enable igmp_snooping
{forward_mcrouter_only}
Description This command allows you to enable IGMP
snooping
forward_mcrouter_only
switch will forward all multicast traffic to
the multicast router, only. Otherwise, the
switch forwards all mulitcast traffic to any
IP router.
Parameters forward_mcrouter_only − Specifies that the
switch should forward all multicast traffic
to
Otherwise, the switch will forward all
multicast traffic to any IP router.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
on the
is
a multicast-enabled
161
switch. If
specified, the
router only.