D-Link DGS-3224TGR Command Line Interface Reference Manual page 207

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User's Guide
create access_profile
dscp <value 0-63> − Specifies that the
switch will examine the DiffServ Code
Point (DSCP) field in each frame's
header.
tos <value 0-127>− Specifies that the
switch will examine the Type of Service
value in each frame's header.
icmp − Specifies that the switch will
examine the Internet Control Message
Protocol
header.
type − Specifies that the switch will
examine each frame's ICMP Type field.
code − Specifies that the switch will
examine each frame's ICMP Code field.
igmp − Specifies that the switch will
examine
Management Protocol (IGMP) field.
type − Specifies that the switch will
examine each frame's IGMP Type field.
tcp − Specifies that the switch will examine
each frames Transport Control Protocol
(TCP) field.
src_port_mask
Specifies a TCP port mask for the source
port.
dst_port_mask
Specifies a TCP port mask for the
destination port.
udp
examine each frame's Universal Datagram
(ICMP) field in
each frame's Internet
<hex 0x0-0xffff>
<hex 0x0-0xffff>
−
Specifies that the
203
each frame's
Group
−
−
switch will