Software Update - D-Link DES-5600 User Manual

Fast Ethernet Switching System User's Guide
Factory Reset to Default Configuration Values
The Factory Reset panel, displayed in Figure 42, is used to reset the DES-5600
and restore all factory default values. Using this panel erases all configurations
and customization.
Figure 42: Factory Reset
Follow these steps to restore factory default configurations:
1.
2.
To exit without resetting:
1.
2.

Software Update

The Software Update panels, shown in Figure 43, are used to update the software
on the DES-5600. Software can be updated using either XMODEM or TFTP.
XMODEM requires a direct physical connection between a PC and the DES-5600.
TFTP requires a TFTP server and that you know the Internet Protocol (IP) address
of the server and the complete path and filename. TFTP can be done over the
network or from a remote location.
Managing the DES-5600
Select Yes.
Press Enter.
Select No or EXIT.
Press Enter.
71