Table of Contents
Advertisement
Fast Ethernet Switching System User's Guide
DES-5600 Technical Specifications
Switch Specifications
Port Specifications
Appendix A
Complies with IEEE 802.3 CSMA/CD 10/100-TX, 100BASE-FX
and 1000BASE-SX
Complies with IEEE 802.1D Spanning Tree
Switched IEEE 802.3 MAC layer frame size: 64-1518
NWAY Auto-negotiation for each 10/100-TX network port
providing auto-detection of connected cable type, auto-sensing of
full and half duplex signaling and auto-configuration
Store-and-Forward switching for reliable error-free packet
transfers
Native SNMP management support with Ethernet MIB II (RFC
1213) and bridge MIB (RFC 1493), RMON MIB (RFC-1757)
16K maximum entries for MAC table
Comprehensive LED indicators display of the system/ port status
1 MB EEPROM (flash memory) for firmware upgrade
RS-232 (DB-9) port for Out-of-Band management (asynchronous,
8-bit data, 1 stop bit, no parity, 19.2 K baud)
Rack mountable (Fits standard EIA 19" rack)
16 port 10/100-TX module with built-in support of RMON and
VLAN
12 port fiber optic (FX) module with built-in support of RMON
and VLAN
4 port gigabit (SX) expansion module with built-in support of
RMON and VLAN
Supports Trunking Group
RJ-45 port for Category 3, 4, and 5 UTP cable (Cat. 5 required for
10/100-TX)
10, 100, 1000 Mbps data transfer rate
NWAY Auto-negotiation for all 10/100-TX ports
Appendix A
117
Advertisement
Table of Contents
Troubleshooting
