Power On - D-Link DES-5600 User Manual

Fast Ethernet Switching System User's Guide

Power On

The universal power supply will adjust to the local power source automatically.
The DES-5600 may be plugged in without having any or with all LAN segment
cables connected.
The power plug is located at the rear of the DES-5600. Plug the cable into the
wall socket and plug the other end into the DES-5600. The power LED lights and
all ports auto negotiate the proper speed and duplex mode.
Reboot the DES-5600 if there is a problem. Contact D-Link Systems, Inc. for
technical support. Check the configuration of the DES-5600 after a power failure
but do not reset unless it is necessary.
The DES-5600 can be used with power sources in the range 100 to 240 VAC., 50
to 60 Hz.
Installing the DES-5600
15