Ports 25 & 26 Status Leds; Option Ports 25~26 Sfp(Mini Gbic) Status Leds - D-Link DES-1226G Manual

100Mbps
On When the LED light is on, the respective port is connected to a
100Mbps Ethernet network.
Off When the LED light is off, the respective port is connected to a
10Mbps Ethernet network, or no link.
Ports 25 & 26 Status LEDs
Link/Act
On When the LED lights on, the respective port is connected to a
10/100/1000Mbps Ethernet network.
Blinking When the LED is blinking, the respective port is transferring or
receiving data on a 10/100/1000Mbps Ethernet network.
Off No link.
1000Mbps
On When the LED lights on, the respective port is connected to a
Gigabit Ethernet network.
Off The respective port is connected to a 10/100Mbps Ethernet
network, or no link.
100Mbps
On When the LED lights on, the respective port is connected to a
100Mbps Fast Ethernet network.
Off When the LED light is off, the respective port is connected to a
10Mbps or Gigabit Ethernet network or there is no link.

Option Ports 25~26 SFP(Mini GBIC) Status LEDs

Link/Act
On : When the SFP(Mini GBIC) module is installed and connected to a
network, the Link/ACT LED lights on.
Blinking : When the LED is blinking, the SFP(Mini GBIC) module is
receiving data on a network.
Off : No link.
1000Mbps
On : When the 1000Mbps LED lights on, the respective port is
connected to a 1000Mbps Gigabit Ethernet network.
Off : When the respective port is disconnected to the network.
Connections
Front Panel
└──────┘
LED Indicators
10/100BASE-TX Twisted-Pair Ports (Port1~24)
These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex
transfer modes. These ports also support automatic MDI/MDI-X crossover detection, giving true "plug and play"
capability. Just plug the network cable directly into the hub; you can use either straight-through or crossover
cable.
10/100 Base-TX Twisted-Pair Ports
┌────────────────┐
6
SFP(Mini GBIC) Ports
┌───┐
└───┘
10/100/1000Base-T
Twisted-Pair Ports