Device Status; System Setting; Trap Setting - D-Link DES-1226G Manual

Device Status

Click on the "Status" to present the device status on this screen. It will display the System Status, Port Status, VLAN Status, Trunk Status, and Mirror
Status.
Press "Refresh" when you need to renew the posted information.

System Setting

The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask, and Gateway. Through the Web
Management Utility, you can easily recognize the device by using the System Name and the Location Name.
The Login Timeout is to set the idle time-out for security issues. When there is no action when running the Web Smart Utility, and it times out, you
must re-login to Web Smart Utility before you set the Utility.
Fill up the IP Address, Subnet Mask, and Gateway for the device.

Trap Setting

The Trap Setting enables the device to monitor the Trap through the Web Management Utility and set the Trap IP Address of the manager where the
trap is to be sent.
System Events: Monitoring the system's trap.
Device Bootup: A trap when booting up the system.
Illegal Login: A trap when an incorrect password is used to login. It will record the IP address that attempted to login.
Figure 16.
Figure 17.
Figure 18. Trap Setting
16