Canon VIXIA GX10 Instruction Manual page 88

Saving and Loading Camcorder Settings
Saving and Loading Camcorder Settings
After you adjust settings in the various menus, you can save those settings on an SD card. You can load those
settings at a later date or on another GX10 camcorder so that you can use that camcorder in the exact same
88
way.
Camcorder settings can only be saved on or loaded from the SD card in card slot B.
Operating modes:
Saving Camcorder Settings
1 Insert the SD card where you want to save the camcorder's settings into SD card slot B.
2 Select [Save].
> [B $ System Setup] > [Backup Menu Settings 7] > [Save]
3 Touch [Yes].
• The camcorder's menu settings will be saved to the card. If menu settings were previously saved, the old file
will be overwritten by the current menu settings.
4 When the confirmation message appears, touch [OK].
Loading Camcorder Settings
1 Insert an SD card that contains previously saved camcorder settings into SD card slot B.
2 Select [Load].
> [B $ System Setup] > [Backup Menu Settings 7] > [Load]
3 Touch [Yes].
• The camcorder's menu settings will be replaced by the settings saved on the card. Then, the screen will turn
black momentarily and the camcorder will restart.
NOTES
• Camcorder settings files are exclusively compatible for use only with GX10 camcorders.
• Passwords/encryption keys that were set by the user under [B System Setup] > [Network Settings] are not
saved with this operation. After loading previously saved menu settings, set up the necessary network
passwords again.