Canon VIXIA GX10 Instruction Manual page 111

Browser Remote: Controlling the Camcorder from a Network
Device
After connecting the camcorder to a Wi-Fi network, you can operate the camcorder remotely via Browser
Remote, a Web browser application that can be accessed using the Web browser on network devices*. Using
Browser Remote, you can check the camcorder's live view image and control various recording settings. On the
Browser Remote screen, you can also check the remaining recording time on the SD card, remaining battery
charge and the camcorder's time code.
* For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.
Setting Up Browser Remote
You can set a unique camcorder identification code and designate the port that the Browser Remote application
should use when accessing the camcorder through the network. The port number (HTTP protocol) used by
Browser Remote is usually set to port 80, but you can change it if necessary. The camcorder ID will appear on
the Browser Remote screen, making it easy to identify which camcorder the application is controlling in case of a
multi-camera shooting setup.
Operating modes:
1 Select [Browser Remote Settings].
> [B ! System Setup] > [Network Settings] > [Browser Remote Settings]
2 To change the port number, touch the [i] button next to [Port No.].
• Touch [Í] or [Î] to set the value for the first digit of the port number and then touch the next digit to select
it. After completing all the digits of the port number, touch [OK].
3 Enter the camcorder ID.
• [Edit] > Enter the desired text using the keyboard screen (A 105) > [OK]
4 Touch [L] and then touch [X].
Browser Remote: Controlling the Camcorder from a Network Device
111