Table of Contents
Advertisement
Wind Screen (Built-in Microphone)
When no external microphone is connected to the MIC terminal, you can activate the built-in microphone's wind
screen. When the wind screen is activated, the camcorder will automatically reduce the sound of wind in the
background as necessary when recording outdoors. You can select one of two levels according to the audio
recording conditions.
Operating modes:
1 Select the [„ Custom Setting] audio scene in advance (A 72).
2 Select [Built-in Mic Wind Screen].
>[C ! Audio Setup] > [Built-in Mic Wind Screen]
3 Touch the desired option and then touch [X].
• Depending on the selected setting, ë or à appears at the right of the screen.
Options
[H Auto (High)]: For a larger wind noise reduction effect. With this setting other low-frequency sounds will be
suppressed as well.
[L Auto (Low) ë]:
For a smaller wind noise reduction effect. Other low-frequency sounds are mostly unaffected.
[j Off]:
The wind screen is turned off.
Frequency Response (Built-in Microphone)
When no external microphone is connected to the MIC terminal, you can apply frequency filters to change the
built-in microphone's characteristics according to the audio recording conditions.
Operating modes:
1 Select the [„ Custom Setting] audio scene in advance (A 72).
2 Select [Built-in Mic Freq. Response].
> [C ! Audio Setup] > [Built-in Mic Freq. Response]
3 Touch the desired option and then touch [X].
Options
h
[
Normal]:
Appropriate for balanced sound under most normal recording conditions.
ç
[
Boost LF Range]:
Accentuates the low-frequency range for more powerful sound.
è
[
Low Cut Filter]:
Filters the low-frequency range to reduce the noise of blowing wind, a car's engine and similar
ambient sounds.
é
[
Boost MF Range]:
Best for recording human voices and dialog.
ê
[
Boost HF+LF Range]:
Best, for example, for recording live music and to clearly capture the special sound
characteristics of a variety of instruments.
Recording Audio
75
Advertisement
Table of Contents
