Table of Contents
Advertisement
Connecting to an External Monitor or Recorder
Operating modes:
Connection Diagram
We recommend that you power the camcorder from a power outlet using the AC adapter.
External
monitor/
digital video
recorder
HDMI input
Recording Video Using an External Recorder
In order to record video and audio on an external recorder connected to the camcorder's HDMI OUT terminal,
you must set the camcorder in external recording-only mode. Refer also to the external recorder's instruction
manual for details on how to record.
Operating modes:
1 Select [Internal/External Rec].
> [3 ! Recording Setup] > [Internal/External Rec]
2 Touch [ù External Rec Only (HDMI)] and then touch [L].
3 Select the configuration of the output signal.
[External Rec Video Config.] > Desired option > [X]
• For details, refer to the Video Output Configuration table (A 97).
NOTES
• Depending on the external recorder used, you may not be able to record on the external recorder using the
selected output video configuration.
• After connecting the camcorder to an external recorder, make test recordings using the video configuration(s)
you plan to use and check the recordings made by the external recorder.
• You can set [3 Recording Setup] > [Rec Command] to [i On] to use the camcorder's REC button to
control also the recording operation of external recorders compatible with recording commands. While [Rec
Command] is set to [i On], the [B System Setup] > [Auto Power Off] setting (power saving mode) will be
disabled.
• About the time code during external recording-only mode:
- The time code mode is automatically set to [
- When the camcorder is set back to internal recording-priority mode, the time code mode will return to its
previous setting.
HTC-100/SS High Speed
HDMI Cable (supplied)
HDMI IN
Connecting to an External Monitor or Recorder
HDMI OUT
terminal
Preset].
99
Advertisement
Table of Contents
