Table of Contents
Advertisement
Date, Time and Language Settings
Changing the Language
The default language of the camcorder is English. You can set it to one of 27 languages. Some settings and
onscreen displays will be displayed in English, regardless of the language setting.
The following procedure is explained using only the touch screen and an abbreviated notation explained in the
28
following section. For a detailed explanation, refer to Using the Menus (A 32).
Operating modes:
1 Select [Language H].
> [B ! System Setup] > [Language H]
2 Touch the desired language and then touch [OK].
3 Touch [X] to close the menu.
Changing the Time Zone
Change the time zone to match your location. The default setting is New York. In addition, the camcorder is able
to retain the date and time of an additional location. This is convenient when you travel so that you can set the
camcorder to match the time of your home location or that of your travel destination.
The following procedure is explained using only the touch screen and an abbreviated notation explained in the
following section. For a detailed explanation, refer to Using the Menus (A 32).
Operating modes:
1 Select [Time Zone/DST].
> [B ! System Setup] > [Time Zone/DST]
2 Touch ["] to set the home time zone, or [#] to set the time zone of your destination when you are
traveling.
3 Touch [Ï] or [Ð] to set the desired time zone. If necessary, touch [$] to adjust for daylight saving
time.
4 Touch [X] to close the menu.
Advertisement
Table of Contents
