Zooming; Using The Focus/Zoom Ring - Canon VIXIA GX10 Instruction Manual

Zooming

Zooming
To zoom in and out, you can use the focus/zoom ring, the zoom rocker on the camcorder, the zoom buttons on
the wireless controller or the onscreen zoom controls. You can also zoom using Browser Remote on a
52
connected network device (A 111, 117).
In addition to the 15x optical zoom, in
Setup] > [Digital Zoom] setting. The camcorder also features a digital tele-converter, which allows you to
enlarge the image on the screen digitally.
* Digital zoom is not available in
Operating modes:

Using the Focus/Zoom Ring

1 Set the focus/zoom ring switch to ZOOM.
2 Turn the focus/zoom ring to adjust the zoom.
• Turn the focus/zoom ring slowly for a slow zoom; turn it faster
for faster zooms.
• The zoom bar that appears on the screen indicates the
approximate zoom position.
NOTES NOTES
• With the [v Camera Setup] > [Zoom Ring Direction] setting,
you can adjust the direction of the focus/zoom ring when it is
used to adjust the zoom.
• If you turn the focus/zoom ring too quickly, the camcorder may
not be able to zoom immediately. In such case, the camcorder will
zoom after you finish turning the ring.
mode, you can turn on the digital zoom* (300x) with the [v Camera
mode or when [v Camera Setup] > [Conversion Lens] is set to [¿ WA-U58].
Focus/zoom ring