Ipv6 Connection Type - Auto-Configuration (Slaac/Dhcpv6) - TRENDnet TEW-751DR User Manual

TRENDnet User's Guide
IPv6 Connection Type – Auto-configuration (SLAAC/DHCPv6)
© Copyright 2013 TRENDnet. All Rights Reserved.
IPv6 DNS Settings
Obtain IPv6 DNS Servers automatically: Allows the router to automatically
obtain IPv6 DNS server IP addresses.
Use the following IPv6 DNS Servers: Manually enters the IPv6 DNS server IP
addresses.
Primary DNS Server: Enter the primary IPv6 DNS server address. This field is
only available when Use the following IPv6 DNS Servers is selected.
Secondary DNS Server: Enter the secondary IPv6 DNS server address. This
field is only available when Use the following IPv6 DNS Servers is selected.
LAN IPv6 Address Settings
Enable DHCP-PD: Tick the check box to enable the DHCP Prefix Delegation
feature.
LAN IPv6 Address: Enter the LAN IPv6 address.
LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local
address.
Address Auto-configuration Settings
Enable automatic IPv6 address assignment: Tick the check box to enable
automatic IPv6 address assignment.
Enable automatic DHCP-PD in LAN: Tick the check box to enable automatic
DHCP-PD in LAN.
Auto-configuration Type: The available IPv6 auto configuration types are
SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful DHCPv6.
Router Advertisement Lifetime: Displays the router advertisement lifetime in
minutes. This field appears when SLAAC+RDNSS or SLAAC+Stateless DHCP
is selected.
IPv6 Address Range (Start): Enter the start IPv6 address in the range. This
field is only available when Stateful DHCPv6 is selected.
IPv6 Address Range (End): Enter the end IPv6 address in the range. This field
is only available when Stateful DHCPv6 is selected.
IPv6 Address Lifetime: Displays the IPv6 address lifetime in minute. This field
appears when Stateful DHCPv6 is selected.
TEW­751DR
25