Internet Connection Type - Static Ip - TRENDnet TEW-751DR User Manual

Dual band wireless router
Hide thumbs Also See for TEW-751DR:
Table of Contents

Advertisement

TRENDnet User's Guide
Internet Connection Type – Static IP
Select Static IP from My Internet Connection Is drop-down list if all the Internet
port's IP information is provided to you by your ISP. You will need to enter in the
IP address, subnet mask, gateway address, and DNS address(es) provided to
you by your ISP. Each IP address entered in the fields must be in the appropriate
IP form, which are four octets separated by a dot (x.x.x.x). The Router will not
accept the IP address if it is not in this format.
IP Address: Enter the IP address assigned by your ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
Primary DNS Server: Enter the primary DNS server IP address that is supplied
by your ISP.
Secondary DNS Server: Enter the secondary DNS server IP address that is
supplied by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port's physical
interface MAC address on the broadband router. It is not recommended that you
change the default MAC address unless required by your ISP.
Clone Your PC's MAC Address: Click to replace the Internet port's MAC
address with the MAC address of your Ethernet card.
TEW­751DR
14

Advertisement

Table of Contents
loading

Table of Contents