Auto-Configuration; Pppoe - TRENDnet TEW-733GR User Manual

TRENDnet User's Guide
• LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local address.
• Address Auto-configuration Settings
• Enable automatic IPv6 address assignment: Tick the check box to enable
automatic IPv6 address assignment.
• Auto-configuration Type: The available IPv6 auto configuration types are
SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful DHCPv6.
• Router Advertisement Lifetime: Enter the router advertisement lifetime in
minutes. This field is only available when SLAAC+RDNSS or SLAAC+Stateless DHCP
is selected.
• IPv6 Address Range (Start): Enter the start IPv6 address in the range. This field is
only available when Stateful DHCPv6 is selected.
• IPv6 Address Range (End): Enter the end IPv6 address in the range. This field is
only available when Stateful DHCPv6 is selected.
• IPv6 Address Lifetime: Displays the IPv6 address lifetime in minute. This field is
only available when Stateful DHCPv6 is selected.

Auto-configuration

IPv6 DNS Settings
• Obtain IPv6 DNS Servers automatically: Allows the router to automatically obtain
IPv6 DNS server IP addresses.
• Use the following IPv6 DNS Servers: Manually enters the IPv6 DNS server IP
addresses.
• Primary DNS Server: Enter the primary IPv6 DNS server address. This field is only
available when Use the following IPv6 DNS Servers is selected.
• Secondary DNS Server: Enter the secondary IPv6 DNS server address. This field is
only available when Use the following IPv6 DNS Servers is selected.
LAN IPv6 Address Settings
• Enable DHCP-PD: Tick the check box to enable the DHCP Prefix Delegation
feature.
• LAN IPv6 Address: Enter the LAN IPv6 address.
• LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local address.
• Address Auto-configuration Settings
© Copyright 2012 TRENDnet. All Rights Reserved.
• Enable automatic IPv6 address assignment: Tick the check box to enable
automatic IPv6 address assignment.
• Enable automatic DHCP-PD in LAN: Tick the check box to enable automatic
DHCP-PD in LAN.
• Auto-configuration Type: The available IPv6 auto configuration types are
SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful DHCPv6.
• Router Advertisement Lifetime: Displays the router advertisement lifetime in
minutes. This field appears when SLAAC+RDNSS or SLAAC+Stateless DHCP is
selected.
• IPv6 Address Range (Start): Enter the start IPv6 address in the range. This field is
only available when Stateful DHCPv6 is selected.
• IPv6 Address Range (End): Enter the end IPv6 address in the range. This field is
only available when Stateful DHCPv6 is selected.
• IPv6 Address Lifetime: Displays the IPv6 address lifetime in minute. This field
appears when Stateful DHCPv6 is selected.

PPPoE

PPPOE Internet Connection Type
• PPPoE Session: Select the PPPoE session. To share this connection with IPv4, click
the Share with IPv4 radio button. To create a new connection, click the Create a
new session radio button.
• Address Mode: Select the PPPoE IP address is dynamic or static.
• IP Address: Enter the static IPv6 address. This field is available when Static IP is
selected.
• Username: Enter the IPv6 PPPOE username. This field is available when Create a
new session is selected.
• Password: Enter the IPv6 PPPOE password. This field is available when Create a
new session is selected.
• Verify Password: Re-type the IPv6 PPPOE password. This field is available when
Create a new session is selected.
• Service Name: Enter the service name. This is optional. This field is available
when Create a new session is selected.
• Reconnect Mode: Select the reconnect mode as Always on, or Manual.
• MTU: Enter the Maximum Transmission Unit (MTU) value.
TEW-733GR
25