TRENDnet TEW-751DR User Manual page 17

TRENDnet User's Guide
TEW­751DR
Address Mode: Select whether this Internet connection requires the use of a
Dynamic IP or Static IP address. PPPoE usually requires a Dynamic IP
configuration.
IP Address: Enter the PPPoE IP address. This option is only available when
Static IP is selected.
Username: Enter the PPPoE account user name. This information is given by
the ISP.
Password: Enter the PPPoE account password. This information is given by the
ISP.
Verify Password: Re-enter the PPPoE account password.
Service Name: This optional field enables the user to enter a service name to
identify this Internet connection here.
Reconnect Mode: Click the radio buttons to specify the reconnect mode. The
user can specify a custom schedule or specify the On Demand, or Manual
option. To specify a custom schedule, use the drop-down menu to select one of
the schedules that has been defined in the Schedules page.
Maximum Idle Time: Enter a maximum idle time during which the Internet
connection is maintained during inactivity.
DNS Mode: When Receive DNS from ISP is selected, it allows the router to
obtain the DNS IP addresses from the ISP. When Enter DNS Manually is
selected, it allows the user to enter DNS IP address manually.
Primary DNS Server: Enter the primary DNS server IP address that is supplied
by your ISP. This field is only available when Enter DNS Manually is selected.
Secondary DNS Server: Enter the Secondary DNS IP address used here. This
field is normally optional. Only one DNS address is required for a functional
Internet connection, but using a second DNS address provides more stability.
This field is only available when Enter DNS Manually is selected.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port's physical
interface MAC address on the broadband router. It is not recommended that you
change the default MAC address unless required by your ISP.
Clone Your PC's MAC Address: Click to replace the Internet port's MAC
address with the MAC address of your Ethernet card.
© Copyright 2013 TRENDnet. All Rights Reserved.
16