Mounting The Loop Handle - Stihl FS 70 Instruction Manual

English
10 Grass cutting blade 230-8
(230 mm dia.)
WARNING
Non-metal grass cutting blades are not
approved.
Deflectors
11 Deflector with blade, for mowing
heads
12 Deflector for metal cutting
attachments
Handle
13 Loop handle
14 Loop handle with
15 Barrier bar
Harness
16 Shoulder strap may be used
17 Shoulder strap must be used
18 Full harness may be used
12

Mounting the Loop Handle

A factory-new machine comes with the
loop handle already mounted.
Using the Barrier Bar
A barrier bar may have to be mounted to
suit the cutting attachment you intend to
use – see "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
Mounting the Barrier Bar
1
1
2
2
5
5
3
3
Take out the screws (1) and remove
N
along with washers (2) and nuts (3).
Remove the loop handle (4) and
N
clamps (5).
3
Fit the square nuts (3) in the barrier
N
bar (6); the holes must line up.
4
3
FS 70 R