Controls - Winix 5300-2 User Manual

CONTROLS

Outlet
PlasmaWave
Indicates whether
PlasmaWave
disabled.
Mode Button
Press to cycle through
and set the desired
mode of operation
(Auto, Sleep).
Air Quality
Indicator
Color-coded LED
indicates one of
three levels of air
quality.
English
Air
Vent
®
Indicator
®
is enabled or
Timer Indicator
If timer has been set, the
LED light indicates the set
time of operation.
Fan Speed
Indicator
Indicates the
current fan speed.
PlasmaWave
Enables or disables
PlasmaWave
Power Button
Turns the unit on
or off.
Fan Speed Button
Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).
소피아 1
®
Button Timer Button
Press to cycle
through and set
®
.
desired length of
operation (1hr,
4hr, 8hr,[NO
TIMER])
소피아 2 영문
Change Filter Indicator
LED light indicates when it is time to
change the filter.
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Odor Sensor
When in Auto
Mode, detects the
amount of odor in
the environment
to adjust fan
speeds.
Light Sensor
Detects the
amount of
ambient light
within the
environment,
to adjust the
brightness
of the LED
indicators.
5300-2
4