Table of Contents
Advertisement
3.1 DVb-s installation
satellite setting
Press p q to highlight the satellite your dish is aimed at. The signal quality bar on the bottom of the
screen allows you to fine tune the alignment of your antenna for optimum reception. Adjust your
antenna for maximum possible signal quality. When the signal cannot be improved anymore, fix the dish
on this position and press the bLUe Scan button to continue.
Automatic sAT scan
Press p q t u to highlight the options of choice and press enTeR to start the channel search. It is
recommended to use the default settings.
3.2 DVb-T installation
Terrestrial setting
First select the Tune Type by pressing t u to select DVB-T, ATV or DVB-T+ATV (DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press p q t u to highlight
the country that you want to install, then press enTeR to start searching.
noTe:
3.3 DVb-c installation
cable setting
First select the Tune Type by pressing t u to select DVB-C, ATV or DVB-C+ATV (DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press p q t u to highlight
the country that you want to install, then press enTeR to start searching.
4.0 PeRsonAL ViDeo RecoRDinG
important notes
For any type of recording with this TV, you must have connected an external device to the
„
„
USB port at the back of the TV to record onto.
The USB device must be FAT32 format.
„
„
When you are using the USB device to record on this TV for the first time, we suggest
„
„
formatting the USB device on the TV before you start the recording.
Make sure you are watching a DTV programme.
„
„
Use a high-quality mobile device to record HD programmes, otherwise the videos will be
„
„
jammed during the playback.
Back up all of the data in the USB storage device in case data was lost due to an unexpected
„
„
accident. STRONG assumes no liability for the losses by misuse or malfunction. Data backup is
the responsibility of the consumer.
8
If you have an active antenna, turn it on by following the instructions in
paragraph 5.4.5 and then repeat the scan.
Advertisement
Table of Contents
